RAD Studio 11.1

TwineCompile - Cut C++Builder compile times by up to 50x!
Post Reply
nightman
Posts: 13
Joined: Mon Sep 27, 2021 1:32 am

RAD Studio 11.1

Post by nightman »

TwineCompile fails at any compilation attempt with this error:
scr001.png
scr002.png
The version available from GetIt is version 5.3.0, which does not seem to be suitable for RAD Studio 11.1
Last edited by nightman on Thu Mar 17, 2022 4:15 am, edited 1 time in total.
Chris
Posts: 16
Joined: Tue Feb 19, 2019 12:51 am

Re: RAD Studio 11.1

Post by Chris »

Same Problem here.

Here's a Picture of the Problem:
Twine.png
(90.21 KiB) Not downloaded yet
Is there an eta when a new Version for the 11.1 Release is planned?

Best Regards
Chris
jomitech
Site Admin
Posts: 2153
Joined: Wed Oct 08, 2008 12:23 am

Re: RAD Studio 11.1

Post by jomitech »

TwineCompile 5.4 with support for RAD Studio 11.1 has just been released. Please go to GetIt and download this new version.
Jon
nightman
Posts: 13
Joined: Mon Sep 27, 2021 1:32 am

Re: RAD Studio 11.1

Post by nightman »

jomitech wrote: Thu Mar 17, 2022 11:41 am TwineCompile 5.4 with support for RAD Studio 11.1 has just been released. Please go to GetIt and download this new version.
Thanks a lot.
Working with Builder without TwinCompiler is very uncomfortable. Unfortunately...
Richard_008
Posts: 36
Joined: Mon Sep 21, 2020 11:53 am

Re: RAD Studio 11.1

Post by Richard_008 »

jomitech wrote: Thu Mar 17, 2022 11:41 am TwineCompile 5.4 with support for RAD Studio 11.1 has just been released. Please go to GetIt and download this new version.
Do you have a changelog for it?

Also, it seems the commandline option still is -ide110. This should be -ide111, right?
jomitech
Site Admin
Posts: 2153
Joined: Wed Oct 08, 2008 12:23 am

Re: RAD Studio 11.1

Post by jomitech »

The only changes in this version is support for 11.1

We did not update the -ide version number because 11.1 replaces 11.0 completely - you cannot have them installed side-by-side.
Jon
Anssi
Posts: 2
Joined: Fri Mar 18, 2022 9:33 am

Re: RAD Studio 11.1

Post by Anssi »

When trying to build from command line, the jtmake.exe gives an error Unknown project version "19.4".
Is there an update coming for jtmake as well?
jomitech
Site Admin
Posts: 2153
Joined: Wed Oct 08, 2008 12:23 am

Re: RAD Studio 11.1

Post by jomitech »

You need to explicitly pass -ide110 to jtmake so that it can read the 11.0 or 11.1 project files correctly.
Jon
Anssi
Posts: 2
Joined: Fri Mar 18, 2022 9:33 am

Re: RAD Studio 11.1

Post by Anssi »

jomitech wrote: Fri Mar 18, 2022 1:11 pm You need to explicitly pass -ide110 to jtmake so that it can read the 11.0 or 11.1 project files correctly.
Thanks, that worked.
Post Reply