RLINK32 Error opening File "C:\...\*.dfm"

TwineCompile - Cut C++Builder compile times by up to 50x!
Chris
Posts: 16
Joined: Tue Feb 19, 2019 12:51 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by Chris »

I turned the setting off, looks good so far!
jomitech
Site Admin
Posts: 2153
Joined: Wed Oct 08, 2008 12:23 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by jomitech »

Interesting. Hopefully it is an acceptable workaround. Still haven't had any luck reproducing the issue.
Jon
Chris
Posts: 16
Joined: Tue Feb 19, 2019 12:51 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by Chris »

I would prefer it the other way. But the important thing is, that it works now and it does :-)

I also tried to reproduce it in a sample project, but had no luck (maybe the error only occurs if the project is a little bit bigger). I try to investigate further in it to provide you a "working" example, when i have time for it.
jomitech
Site Admin
Posts: 2153
Joined: Wed Oct 08, 2008 12:23 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by jomitech »

I have a fix that may solve this issue. Please download the following file and extract it into the TwineCompile Program Files directory.

http://jomitech.com/downloads/JTBuildInterface104.zip
Jon
Chris
Posts: 16
Joined: Tue Feb 19, 2019 12:51 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by Chris »

Thank you! I'll give it a try and let you know!
Chris
Posts: 16
Joined: Tue Feb 19, 2019 12:51 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by Chris »

Unfortunately this didn't solved the problem :-(
Post Reply