RLINK32 Error opening File "C:\...\*.dfm"

TwineCompile - Cut C++Builder compile times by up to 50x!
Chris
Posts: 15
Joined: Tue Feb 19, 2019 12:51 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by Chris » Fri Sep 25, 2020 3:54 am

I turned the setting off, looks good so far!

jomitech
Site Admin
Posts: 2018
Joined: Wed Oct 08, 2008 12:23 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by jomitech » Fri Sep 25, 2020 8:25 pm

Interesting. Hopefully it is an acceptable workaround. Still haven't had any luck reproducing the issue.
Jon

Chris
Posts: 15
Joined: Tue Feb 19, 2019 12:51 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by Chris » Mon Oct 12, 2020 11:51 pm

I would prefer it the other way. But the important thing is, that it works now and it does :-)

I also tried to reproduce it in a sample project, but had no luck (maybe the error only occurs if the project is a little bit bigger). I try to investigate further in it to provide you a "working" example, when i have time for it.

jomitech
Site Admin
Posts: 2018
Joined: Wed Oct 08, 2008 12:23 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by jomitech » Thu Oct 15, 2020 8:25 am

I have a fix that may solve this issue. Please download the following file and extract it into the TwineCompile Program Files directory.

http://jomitech.com/downloads/JTBuildInterface104.zip
Jon

Chris
Posts: 15
Joined: Tue Feb 19, 2019 12:51 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by Chris » Sun Oct 18, 2020 11:39 pm

Thank you! I'll give it a try and let you know!

Chris
Posts: 15
Joined: Tue Feb 19, 2019 12:51 am

Re: RLINK32 Error opening File "C:\...\*.dfm"

Post by Chris » Tue Oct 20, 2020 9:06 am

Unfortunately this didn't solved the problem :-(

Post Reply